M390 vs. Elmax

The Ultimate Guide to 6 Key Differences


TactileCarry is reader-supported. Some links in this post are affiliate links, and I may earn a commission if you buy through them, at no extra cost to you.

Kunwu X-Padre with Elmax blade steel — M390 vs Elmax comparison
The Kunwu X-Padre with a stonewashed Elmax blade

If you’ve spent any time browsing high-end EDC knives, you’ve almost certainly run into these two names. Both steels sit at the top of nearly every “best blade steel” list, and for good reason. Both are powder-metallurgy stainless steels that deliver a mix of edge retention, corrosion resistance, and toughness that older steels like 154CM or VG-10 can’t match.

But “premium” doesn’t mean “identical.” M390 and Elmax come from sister companies, use similar production methods, and share a lot of their alloying elements. Yet they behave differently enough on the sharpening stone and in the field that picking between them actually matters.

This M390 vs. Elmax breakdown covers where each steel comes from, how their chemistry shapes real-world performance, and which one makes more sense for how you actually use a knife.

Quick Answer: M390 edges out Elmax on edge retention and corrosion resistance, making it the better pick for a dedicated EDC blade or dive knife. Elmax is tougher and noticeably easier to sharpen, making it the better pick for hard-use knives or anyone maintaining their own edge at home. Neither is a wrong choice. It comes down to how you use the knife.

Where These Steels Come From

M390 comes from Böhler in Austria, and Elmax comes from Uddeholm in Sweden. Both are part of the same parent group (often called Böhler-Uddeholm), which has become something of a household name in the knife community, even if most buyers only ever see it on a spec sheet.

M390 is Böhler’s flagship “super steel.” It’s so respected that other steelmakers produce near-identical equivalents: Crucible’s CPM 20CV and Carpenter’s CTS-204P are functionally the same steel with minor production differences. When you see any of those three names on a knife, you’re getting essentially the same performance.

Elmax wasn’t designed with pocket knives in mind. Uddeholm built it as a tool steel for plastic-molding work, where a mold needs to resist both wear and corrosion, and the knife industry adopted it later. That heritage shows: Elmax aims for a balanced profile rather than chasing maximum wear resistance.

M390 vs. Elmax on the Sitivien ST270 and Vosteed Psyop
Sitivien ST270 (M390) and Vosteed Psyop (Elmax)

1. Chemistry: What’s Actually in Each Steel

Steel performance comes down to composition, and the chemistry gap explains most of the differences below.

  • M390: about 1.9% carbon, 20% chromium, 4% vanadium, 1% molybdenum, and 0.6% tungsten
  • Elmax: about 1.7% carbon, 18% chromium, 3% vanadium, and 1% molybdenum

The molybdenum is the same in both, so the real story is that M390 has more of nearly everything else. Here’s what that means:

  • Vanadium and carbon: M390 has more of both, so more vanadium carbides form in the steel. These carbides are much harder than the steel around them, and they’re the main reason M390 holds an edge so long. The tradeoff is a more abrasive steel that takes more work to sharpen.
  • Chromium: Both steels have plenty for corrosion resistance, but M390’s extra chromium gives it marginally better rust and stain resistance. That’s useful if a knife sees a lot of moisture, sweat, or salt air.
  • Total carbide volume: Elmax’s leaner recipe means fewer hard carbides overall. That’s why it’s generally considered the tougher, less chip-prone of the two.
Kizer Drop Bear Zero Pocket Knife with M390 blade — M390 vs Elmax comparison
This version of the Kizer Drop Bear uses M390 blade steel

In short: M390 leans harder into wear resistance and corrosion resistance, while Elmax trades a bit of both for a tougher, more forgiving blade.

Elmax vs. M390: Quick Comparison Chart

PropertyM390Elmax
Made byBöhler (Austria)Uddeholm (Sweden)
Composition~1.9% C, 20% Cr, 4% V, 1% Mo, 0.6% W~1.7% C, 18% Cr, 3% V, 1% Mo
EquivalentsCPM 20CV, CTS-204PNone common
Edge RetentionExcellent ✅Very good
Corrosion ResistanceExcellent ✅ (slightly better)Excellent
ToughnessGoodBetter ✅
Ease of SharpeningHarder (diamond/CBN recommended)Easier ✅ (works with more stones)
Best ForEDC, dive and fishing knivesHard use, home sharpeners

2. Edge Retention

This is the category M390 is famous for. Its higher vanadium carbide volume resists abrasive wear, so it keeps a working edge through more cardboard, rope, and everyday cutting before it needs a touch-up.

In cutting tests and long-term ownership reports, M390 consistently ranks among the best-performing stainless steels available. It’s often mentioned alongside CPM S90V and CPM 15V, though it doesn’t quite reach their extreme wear-resistance numbers.

Elmax isn’t far behind. It holds an edge longer than mid-tier steels like S35VN or D2, and most people won’t notice a difference in daily carry unless they’re doing heavy, repetitive cutting. The gap shows up more in torture tests than in normal EDC use.

Winner: M390, but by a smaller margin than the spec sheets suggest.

Watch: M390 vs. Elmax on the TactileCarry channel

3. Corrosion Resistance

Both steels are excellent here, so neither one will disappoint. M390’s higher chromium gives it a slight edge, which is why it’s often chosen for dive knives and other marine tools.

Elmax is still highly corrosion-resistant. Most owners won’t see a practical difference unless the knife is regularly exposed to saltwater or left wet for long stretches.

Winner: M390, marginally.

4. Toughness

This is where Elmax pulls ahead. Its lower carbide volume gives it a tougher, more shock-resistant edge that’s less prone to micro-chipping when it hits something unexpected, like a knot in wood or a staple.

M390’s denser carbide structure and higher typical hardness make the very edge a bit more brittle, especially when it’s ground thin. That doesn’t make M390 fragile; plenty of hard-use knives run it without issue. But if a knife will see batoning, prying, or other edge-stressing work, Elmax has a real advantage.

Winner: Elmax.

5. Ease of Sharpening

Anyone who’s put an M390 blade on a stone knows it doesn’t sharpen quickly. The same carbides that give it great edge retention also resist your sharpening stones. Diamond or CBN abrasives are close to mandatory for efficient sharpening, and conventional ceramic or Arkansas stones will struggle.

Elmax still benefits from good abrasives, but it’s noticeably easier to sharpen. It responds to a wider range of stones and takes a keen edge with less effort, which makes it more approachable if you maintain your own knives.

Winner: Elmax, and this is one of the most noticeable differences in day-to-day ownership.

6. Cost and Availability

Pricing is generally comparable, though it varies by brand and model. M390 is more widely available across production knives and has become something of an industry standard for “premium steel” tiers. Elmax shows up a bit less often but is still well represented, especially from brands with strong ties to Uddeholm.

Winner: M390, for selection.

Knives to Consider

Want to try one of these steels? Here are the knives featured in this post:

M390 vs. Elmax: Which Should You Choose?

For most people, either steel will outperform 90% of what’s on the market. The differences above matter more to enthusiasts than to someone choosing what to carry to work. Still, here’s a simple way to decide:

  • Choose M390 if maximum edge retention and corrosion resistance are the priority: a dedicated EDC blade, a dive or fishing knife, or anything that needs to go long stretches between sharpenings.
  • Choose Elmax if you want a tougher blade that’s easier to maintain at home, or if the knife will see harder use where edge stability matters more than the last bit of wear resistance.

Both steels show what modern powder metallurgy can do. If you’re on the fence, think about how the knife will actually be used, and how often you’re willing to break out the diamond stones, rather than chasing whichever steel wins on paper.

Frequently Asked Questions

Is M390 better than Elmax?

M390 has the edge in raw edge retention and corrosion resistance, so it’s usually the better pick for a dedicated EDC or dive knife. But “better” depends on use. Elmax is tougher and easier to sharpen, so it’s often the better choice for hard-use knives or anyone who sharpens their own blades.

Is Elmax tougher than M390?

Yes. Elmax has less carbon, vanadium, and chromium than M390, so it forms fewer hard carbides. That makes it more resistant to chipping under stress, such as batoning or prying. M390’s denser carbide structure gives it better wear resistance but a slightly more brittle edge.

Which is easier to sharpen, M390 or Elmax?

Elmax is noticeably easier to sharpen. M390’s dense vanadium carbides resist abrasion from sharpening stones the same way they resist abrasion from cutting, so it holds an edge longer but takes more work, typically with diamond or CBN stones, to restore one.

Is CPM 20CV the same as M390?

Practically, yes. CPM 20CV (Crucible) and CTS-204P (Carpenter) have nearly identical chemistry to M390, and in a knife they perform about the same. Differences come down to the heat treatment each knife maker uses.

Is Elmax a good stainless steel?

Yes. Elmax is a premium powder-metallurgy stainless steel with excellent corrosion resistance and very good edge retention. It comfortably outperforms mid-tier steels like S35VN or D2, and the day-to-day gap between Elmax and M390 is smaller than the spec sheets suggest.

Comparing more steels? See how M390 and Elmax stack up against dozens of others in the sortable Blade Steel Comparison Chart.
Questions?Email support@tactilecarry.com — we usually reply within 1 business day.
Ships from Gilbert, AZShips in 1 business day via USPS with tracking. Free local pickup available.
Free shipping $100+$7.95 flat rate under $100. All 50 US states. Shipping details
Secure checkout by StripeCards, Cash App Pay, Amazon Pay, Link, ACH, or pay over time with Klarna & Affirm.
Easy returnsBrand new in original packaging. Return Policy